Skip to content
Gridcensus

LARSON

Substation

Washington · PUD NO 2 OF GRANT COUNTY

Max voltage
230
kV

At a glance

LARSON is a 230 kV electric substation in Washington on PUD NO 2 OF GRANT COUNTY's transmission network, recorded in the HIFLD transmission dataset. 7 transmission lines connect to it. 34 of Washington's 785 named substations operate in a higher voltage band. The highest-scoring datacenter candidate site within about 25 miles is LARSON in Grant County, with a DC Readiness score of 66/100.

LARSON is an electric transmission substation in Washington, on PUD NO 2 OF GRANT COUNTY's transmission network. It is classified as high-voltage (230 kv) and connects 7 transmission lines. Substation proximity is one of the strongest speed-to-power signals for siting a datacenter — interconnection distance to an energized, high-voltage bus is often the binding constraint on time-to-energization.

Voltage & classification

Max voltage230 kV
Min voltage115 kV
Voltage classHigh-voltage (230 kV)
Connected lines7

Ownership

Line owner (most lines)PUD NO 2 OF GRANT COUNTY
Coordinates47.1909, -119.2761

Connected transmission lines

Lines terminating at or passing through this substation, by HIFLD line ID, highest voltage first.

Line IDVoltageOwnerStatusLength
#205779230 kVPUD NO 2 OF GRANT COUNTY—7.5 mi
#207232230 kVPUD NO 2 OF GRANT COUNTY—11.3 mi
#207234115 kVPUD NO 2 OF GRANT COUNTY—5.6 mi
#211272115 kVPUD NO 2 OF GRANT COUNTY—11.4 mi
#211273115 kVPUD NO 2 OF GRANT COUNTY—15.5 mi
#211287115 kVPUD NO 2 OF GRANT COUNTY—3.2 mi
#212251115 kVNORTHERN WASCO COUNTY PUD—0.1 mi

Browse the full transmission-line map →

Nearby datacenter candidate sites

Scored candidate sites within roughly 25 miles of LARSON, ranked by DC Readiness. Sites this close to an energized substation carry a strong speed-to-power advantage.

Candidate sites near LARSON substation
SiteTypeStateCountyVoltageCapacityQueue waitScore
LARSONSubstation-AdjacentWAGrant County230 kV300 MW3.5 yrs66.3
UNKNOWN206111Substation-AdjacentWAGrant County230 kV300 MW3.5 yrs65.2
TAP206107Substation-AdjacentWAGrant County230 kV300 MW3.5 yrs65.2
UNKNOWN206113Substation-AdjacentWAGrant County230 kV300 MW3.5 yrs65.1
SAND DUNESSubstation-AdjacentWAGrant County230 kV300 MW3.5 yrs65.0
TAP206112Substation-AdjacentWAGrant County230 kV300 MW3.5 yrs64.9
ROCKY FORDSubstation-AdjacentWAGrant County230 kV300 MW3.5 yrs64.7
POTHOLESSubstation-AdjacentWAGrant County230 kV300 MW3.5 yrs63.9

How does LARSON compare with other substations in Washington?

Washington has 2,106 substation records in HIFLD, of which 785 carry a station name; the rest are unnamed tap points, risers and line ends. 103 named substations in the state are in LARSON's 230–344 kV band (13% of named stations). 34 sit in a higher band. 34 named substations in Washington operate at 345 kV or above. The highest voltage recorded in the state is 500 kV, and the state median is 115 kV.

Who owns the transmission lines at LARSON?

The 7 connected lines listed above are owned by PUD NO 2 OF GRANT COUNTY, NORTHERN WASCO COUNTY PUD. Line voltages range from 115 kV to 230 kV. Their combined recorded length is about 54.7 miles.

How do candidate sites near LARSON score?

The 8 highest-scoring candidate sites within about 25 miles range from 64 to 66 on the 0–100 DC Readiness scale. They fall in Grant County. The Washington average across 6,019 scored sites is 51.7. 1,343 of those Washington sites are classed as substation sites (candidate locations generated at an existing substation).

Frequently asked questions

What voltage is LARSON substation?

LARSON has a maximum voltage of 230 kV and a minimum of 115 kV. That places it in the 230–344 kV band. The median named US substation in this dataset is 115 kV, so LARSON is above the national midpoint.

How many transmission lines connect to LARSON substation?

7 transmission lines terminate at or pass through LARSON in the HIFLD line data. The connected lines listed here run at 230 kV, 115 kV. Together the listed lines cover about 54.7 miles.

Who owns LARSON substation?

HIFLD does not publish substation owners directly. Most of the transmission lines that end at LARSON belong to PUD NO 2 OF GRANT COUNTY, and others to NORTHERN WASCO COUNTY PUD. GridCensus derives this from the line data, so confirm ownership with the utility for anything contractual.

Where is LARSON substation located?

LARSON is in Washington at 47.1909, -119.2761. The datacenter candidate sites closest to it are in Grant County.

Are there datacenter candidate sites near LARSON substation?

GridCensus lists at least 8 scored candidate sites within roughly 25 miles of LARSON. The highest-scoring is LARSON at 66/100. Across Washington, the average DC Readiness score is 51.7.

Other 230 kV substations in Washington

About this data

Source: HIFLD Electric Substations and Transmission Lines (U.S. Department of Homeland Security), as published June 29, 2026. See the methodology for how records are matched, cleaned and scored.

Cite as: GridCensus, “LARSON substation, Washington”, https://gridcensus.com/substations/washington/larson-9452f41d (data as of June 29, 2026).

Dataset updated . Screening estimates derived from public data sources.

Substation attributes are derived from public HIFLD / EIA infrastructure data and may lag real-world upgrades or retirements. Voltage and connected-line counts are screening figures — confirm available capacity and interconnection terms directly with the operating utility and ISO.

Go deeper than the public screen

Every site and score for LARSON substation, Washington is free to browse. Pro adds Watchtower on 25 sites, alerts when new candidate sites, datacenters or interconnection-queue requests appear in your markets, score and capacity history, and CSV export. Enterprise adds team seats, weekly data files for all 147,272 sites, the REST API and an MCP server for AI tools.